 |
| water dispenser |
The drinking water dispenser reaches every household, and provides many conveniences for life. However, people often ignore the cleanliness and tartness of the dispenser.
If the dispenser in the long term is not cleaned, it will certainly give the opportunity to breed the bacteria, the water that is finally not in accordance with health standards.
Generally a gallon of water is placed upside down on a dispenser. Through the existing hose in the dispenser, water is supplied to two hot and cold tubes.
Usually despite repeatedly replacing gallons of water, we ignore the fact that in the dispenser there is water remaining in the dispenser tube of nearly 1000 ml, and in the water is hiding the disease-causing bacteria. Over time, by itself it will become a breeding ground for bacteria.
In the past the dispenser company always provided free service for cleaning dispensers. However, due to the lack of professional knowledge and cleaning equipment, the free service generally only cleans the physical part, does not touch the point.
Even to reduce the cost of free service, many of them only do the perfunctory, and for the sake of economizing, they use cheap cleaning agents to sterilize the dispenser, so can not guarantee the quality of cleaning.
The municipal water dispensers basically have spread to every family, many consumers are worried that ordinary heating devices can not cook water until it is cooked, so they drink raw and cooked mixed water.
Drinking water that is not boiled until cooked in the long run will make the body susceptible to bacteria. Although it is drunk together with boiled water, but the bacteria present in the raw water is difficult to eradicate.
Ordinary heating structures differ from household dispensers, home-use dispensers are separate engine and gallon structures, so there is no 'yin yang' water problem. (long boiled water)It is therefore recommended for families using dispensers, to clean and sterilize dispensers regularly. Because in addition to ensuring the dispenser can work normally, also can reduce the spread of bacteria in the water.
In choosing a dispenser it is important to consider based on the needs and capabilities of the machine.If you do not like cold drinks, every day just needed to brew coffee and tea, then buy a hot dispenser is enough.
If you live in the tropics, use more heat in the summer, you belong to people who like to drink cold, then buy a dispenser two hot and cold functions. In addition, there is still a dispenser with three functions, cold, warm and hot, choose based on need.
Of the many dispenser products, when summarized nothing more than only 3 types, namely, warm-hot, cold-hot, cold-warm-hot.
Hot-cold dispensers are divided into two types, semiconductor cooling system dispensers and compressor cooling system dispensers.
The compressor refrigeration system dispenser works much faster than the semiconductor cooling system dispenser, the cold water supply is also higher than that of the semiconductor system.
Cleaning and maintenanceDispenser at home after being used in a period of time, will accumulate a thin layer of precipitate that is difficult to clean. Actually there is a simple and healthy way, you can try it.
Lemon thinly sliced, then place in a boiling container with water to boil for 2 to 3 hours.
When replacing the water dispenser, use boiled lemon juice to wash the dispenser, the dirt sludge can not only easily be cleaned, also in the dispenser will be left behind the fragrant lemon scent.The usual cleaning method can follow the steps below.
1. Unplug the power cord, remove the empty gallon tube, open the dispenser valve, to keep the remaining water in the dispenser cavity out.
2. Use a clamp to hold the moistened cotton wool, thoroughly cleaning the tube in the dispenser and the outer side-inside the lid.
3. Pour a versatile sterile disinfectant into a dispenser tube, soak for 10-15 minutes.
4. Open the dispenser valve to remove / remove disinfectant.
5. Rinse the entire cavity of the dispenser with clean water, then open all the dispenser taps to remove the water6. Use a washcloth to clean the back side of the dispenser where there is an on-off switch.
No comments:
Post a Comment